HTA – Magnetic Drive Regenerative Turbine Pump
Mag drive regenerative turbine pumps series HTA are made of AISI 316 or, on request, in other metallic materials (Hastelloy or Titanium) and are suitable for dangerous and inflammable liquids. Thanks to the innovative mag drive system, pumps model HTA reduce the risks of losses and the maintenance costs. The transmission of the motion occurs through magnetic joints without using mechanical seals. This guarantees the maximum hermetic safety and efficiency. The pumped liquid has to be clean and without solids in suspension.
DESIGN OF MAGNETIC DRIVE PUMPS MOD. HTA
Magnetic drive pumps have a particular sealless design that is suitable to pump corrosive and dangerous liquids thanks to the high chemical resistance and absence of leakage and emissions. The structure is really simple so that the pump requires a very reduced maintenance with consequent save in terms of repairing and spare parts costs during the pump life. The external magnet placed on the drive shaft transmits the motion to the internal magnet connected to the impeller which rotates and moves the fluid through the pump.
TECHNICAL DATA | 50 HZ | 60 HZ |
---|---|---|
Flow | 0,2÷7 m3/h | 2,6÷35 GPM |
Max Head | 78 mcl | 314 ft |
Temp | -40°/+160° C | -40°/+320° F |
Mawp | 25 BAR | 360 PSI |
- High head/ low flow capability minimizes by-pass requirements;
- Materials available: AISI 316, Hastelloy, Titanium;
- Materials in contact with the liquid:
- casing and impeller: AISI316,
- O-ring: EPDM/VITON,
- bushing: PTFEC,
- shaft: Hastelloy C276;
- Max flow 7 m3/h, max head 78 mlc;
- Max temperature: 120° standard version (high temperature version 160°C)
- Pressure rating NP 25 at 20°C
- Impeller design handles up to 20% entrained gas. Ideal for pumping liquefied gas.